How to Replace an RV Compartment Door: Step-by-Step Guide
In this guide, we team up with Keystone RV Master Technicians, Matt and Bart, who demonstrate the steps involved in replacing an RV compartment door. This DIY project will save you time and money while keeping you ready for your next camping adventure!
Tools Needed
Before you start, gather the following tools and materials:
- Screw gun with square bit
- Razor knife
- Putty stick
- New RV compartment door
- Small flat screwdriver
- Putty, caulk, and caulk gun
- 1" screws
- Adhesive remover/alcohol cleaner
- Shop towels and rubber gloves
Considerations Before Starting
- Size and Weight: Determine if the door is manageable alone or if you need assistance.
- Decals: If your door has a decal, ensure you have additional decals on hand.
- Hardware: Check if the old door has struts, magnet latches, or T-latches that need to be removed and installed on the new door.
Step-by-Step Instructions
- Remove the Old Door:
- Take off the struts and screw cover if equipped. Prop the door open. Remove all screws from the door frame, then shut the door. Cut the existing sealant to release the door from the wall. Carefully pull the door free, avoiding damage to the decals.
- Transfer Hardware:
- If equipped, remove the old magnet or catch from the old door and install it on the new door.
- Prepare the Area:
- Clean the compartment door area/surface with adhesive remover and then prep it with alcohol. Apply putty or sealant to the new door frame.
- Install the New Door:
- Push the new door into the opening and add a screw in each corner. Open and close the door to ensure a good fit without binding or gaps. Adjust as necessary and install the remaining screws.
- Finalize the Installation:
- Remove excess putty and clean the surface. Clean the surface of the door and install the new decal, if applicable. Seal around the edges and install the screw cover if equipped.
Replacing your RV compartment door can be a straightforward project with the right tools and guidance. Follow these steps carefully, and you'll have your new door installed and ready for use in no time. Happy camping!
Disclaimer: The information contained in this article is deemed to be true and accurate at the time of publication. However, due to the evolving nature of our products and services, there may be changes or updates that occur after this article was published. We encourage users to verify the contents and consult with their dealer or Keystone RV for the most current information. If you have any questions or require further clarification, please do not hesitate to contact your dealer or reach out to Keystone RV directly.
